DTF Heat Transfer - Dad Man Legend

Select Style

10" 12"

Product variants

$2.00

Buy More & Save discounts apply only when quantities are added from this page. The discounts do not apply when quantities are adjusted in the cart.

🏆 Earn 1 point for every $1 purchased. Redeem points for discounts. Read More

Description

Celebrate dad with our Dad Man Legend DTF heat transfer, perfect for creating personalized gifts that honor the legendary men in your life.

Select a fabric that is low pile, smooth, and can withstand heat. Cotton, polyester, cotton/polyester blends, and linen are all excellent choices. Avoid using fabrics with heavy textures, such as deep velour or fur, as these can interfere with adhesion. Additionally, ensure your fabric can tolerate heat of 300°F for 30 seconds, as this is required for proper application.
Preheat your fabric for a few seconds to remove moisture and wrinkles.
Place the DTF transfer design-side down on the fabric where you want it.
Using a heat press or iron, press at the recommended temperature (usually around 300°F) for 15–20 seconds with medium pressure. Note too much heat or too hot of a press/iron will discolor the transfer.
Allow the transfer to cool slightly, then peel off the film gently. If the transfer pulls up, apply more heat and repeat this step.
Press for a few more seconds to ensure full adhesion (optional).

Due to the nature of the dyeing process employed with Comfort Colors® pigment dyed shades, loose pigments may remain on the surface of the garments even after the first wash. We therefore strongly recommend washing these garments only with like-colored garments, as some of the pigment dyes may stain light-or white-colored garments in the wash cycle. Washing the garments in cold water will reduce the possibility of staining. Shade variations are inherent in the garment dyeing process. Our garments are pre-shrunk during the garment dye and wash processes for almost no shrinkage at home.
DTF transfers are created using a specialized film that holds a DTF ink design, which adheres well to fabric. An adhesive powder is added to the ink, allowing it to bond securely to the fabric. A heat source, like a heat press or iron, is then applied to activate the adhesive powder, ensuring the design sticks properly and durably to the fabric. Together, these materials create a durable, vibrant transfer.